 |
VX
|
|
|
- The VX™ is powered
by a Yamaha MR-1™ four-stroke engine.
This is a compact, ultra-lightweight, 110 horsepower,
four-cylinder, 1052cc, DOHC, 20-valve, liquid-cooled
engine for class-leading performance.
- Electronic Fuel Injection
(EFI): Delivers a smooth, high power output
with low fuel consumption and low exhaust emissions.
- Specially Designed, One-piece
Cylinder and Crankcase Assembly: Provides tremendous
engine rigidity that's lighter and stiffer than
two-piece designs.
- Slant Detection Switch:
Electronic switch stops engine and oil pumps immediately
if watercraft becomes overturned, protecting motor
from water ingestion.
- Dry Sump Lubrication:
Uses two engine oil pumps to deliver lubricated oil
to each moving part with water-jacketed sump and
oil backflow protection.
- Yamaha Engine Management
System (Y.E.M.S.): An integrated, computerized
management system that controls and adjusts such
functions as ignition timing, fuel injection mapping,
engine diagnostics and OTS. The OTS function of
Y.E.M.S. activates when the operator releases the
throttle lever and attempts to steer the watercraft.
This assists the operator in turning while the
watercraft is decelerating.
- Thermostatic and Pressure
Controlled Cooling System: Water flow through
the engine is controlled by a thermostat and pressure
system and is maintained by a pressure control
valve.
- Corrosion Protection System:
Sacrificial zinc anodes protect the engine from harmful
galvanic corrosion. Stainless steel fasteners (nuts,
bolts, hardware) provide a long service life.
- Electronically Controlled,
Variable Ignition Timing: For exact ignition
advance control at all throttle positions and RPMs.
|
- The VX pump design is one
of the most efficient pump configurations ever: the
pump increases stream velocity and thrust while
decreasing cavitation and prop spin.
- Stainless Steel Impeller
Housing Liner: For high durability, the liner
maintains accurate clearance tolerances between
the impeller and the housing.
- High Flow Intake Duct and
Grate: The dynamic shape of these items directs
water flow into the pump for better thrust, performance
and hook up.
- Cooling Water Intake Filter:
Filters out harmful debris that could cause blockage
of important cooling water passages.
- Pumps are Manufactured
with YDC30: A combination of zinc and copper
alloys, developed by Yamaha marine engineers, that
offers excellent corrosion protection.
|
- The VX hull is designed
to be light and strong.
- Progressive, V-Hull with
Integrated Bow Spray Guard: Provides excellent
maneuverability, handling and comfort.
- Performance Sponson Design:
Provides added straight-line comfort and an improved
two-up and three-up riding experience.
|
- Multi-function Electronic
Information Center: Provides the operator a
quick read on speed, RPM, fuel level, low fuel
warning, low oil pressure warning, overheat warning,
hour meter, check engine light with self diagnostic
function.
- 19 Gallons of Total Storage:
Includes a large bow storage locker and glovebox.
- Comfortable One-piece Seat:
Ergonomically-designed and contoured for added support.
The extra-long seat is easily removed for quick access
to the engine compartment.
- Extra Large Boarding Platform:
Provides a stable platform for reboarding.
- Finger Throttle Lever:
Provides added comfort while reducing hand fatigue.
- Yamaha's Trademarked
Visibility Spout®: A waterspout from the rear of the
craft that improves the watercraft's conspicuity.
|
|
|
 |
|
| Engine Type |
4-Cylinder, 4-Stroke |
|
| Bore/Stroke |
76mm x 58mm |
|
| Displacement |
1052cc |
|
| Fuel |
Regular Unleaded |
|
| Type of Exhaust |
Wet |
|
| Type of Lubrication |
Dry Sump |
|
| Cooling |
Open-Looped, Water |
|
| Starting |
Electric |
|
| Ignition |
Direct |
|
| Compression Ratio |
11.4:1 |
|
| Carburetor/Injection |
EFI (Electronic Fuel Injection) |
|
| Ignition Timing |
30° BTDC |
|
| Spark Plug |
NGKCR9EB |
|
| Pump |
155mm Axial Flow Single Stage |
|
| Transmission |
Direct Drive from Engine |
|
| Gear Ratio |
21:31 |
|
| Impeller |
3-Blade, Stainless Steel |
|
| Length |
126.8” (3.22m) |
|
| Width |
46.1” (1.17m) |
|
| Height |
45.3” (1.15m) |
|
| Seat Length |
66”/56” (1.67m/1.43m) |
|
| Dry Weight |
703 lbs (319 kg) |
|
| Fuel Capacity |
15.9 gal (60 L) |
|
| Vehicle Capacity |
3 person/ 529 lbs (240 kg) |
|
| Oil Capacity |
1.1 gal (4.3 L) |
|
| Storage Capacity |
18.7 gal (70.8 L) |
|
| Reserve Fuel Capacity |
Not Applicable |
|
| Hull Material |
SMC (Sheet Molded Compound) |
|
| Warranty |
1 Year (Limited Factory Warranty) |
|
| Color |
Aqua Blue |
|
|
|
|
