 |
FX
|
|
|
- The FX® is powered
by the Yamaha MR-1™ engine, the first
four-stroke motor designed specifically for personal
watercraft applications. The MR-1E powerplant is
a compact, ultra-lightweight, four-cylinder, 998cc,
DOHC, 20-valve, liquid-cooled engine for unequalled
performance.
- Electronic Fuel Injection
(EFI): Four individually adjustable throttle
bodies, throttle position sensor (TPS) and intake
air pressure and air temperature sensors supply
the optimum air/fuel mixture. The results are a
smooth, high power output with low fuel consumption
and low exhaust emissions.
- Specially Designed, One-piece
Cylinder and Crankcase Assembly: Provides tremendous
engine rigidity that's lighter and stiffer than
two-piece designs.
- Slant Detection Switch:
Electronic switch stops engine and oil pumps immediately
if watercraft becomes overturned, protecting motor
from unwanted water ingestion.
- High Volume Intake Box:
With water repellent air filter and flame arrestors
- Dry Sump Lubrication:
Uses two engine oil pumps to deliver lubricated oil
to each moving part with water-jacketed sump and
oil backflow protection.
- Yamaha Engine Management
System (Y.E.M.S.): An integrated, computerized
management system that controls and adjusts such
functions as ignition timing, fuel injection mapping,
engine diagnostics and OTS. The OTS function of
Y.E.M.S. activates when the operator releases the
throttle lever and attempts to steer the watercraft.
This assists the operator in turning while the
watercraft is decelerating.
- Independent Water-jacketed
Exhaust Manifolds with Collector: Achieves
high power while keeping noise and exhaust heat
under control.
- Thermostatic and Pressure
Controlled Cooling System: Water flow through
the engine is controlled by a thermostat and pressure
system and is maintained by a pressure control
valve.
- Electronically Controlled,
Variable Ignition Timing: For exact ignition
advance control at all throttle positions and RPMs.
- Corrosion Protection System:
Sacrificial zinc anodes protect the engine from harmful
galvanic corrosion. Stainless steel fasteners (nuts,
bolts, hardware) provide a long service life.
|
- The FX's 155mm hyper-flow
jet pump propulsion system with three-blade
stainless steel impeller is designed to maximize
water flow for high performance. The FX pump configuration
provides excellent hook-up and smooth acceleration.
- Reverse: Allows the
watercraft to be backed up off a trailer or out of
tight spots where you cannot turn around easily.
- Quick Shift Trim System
(Q.S.T.S.): Mechanically operated, this system
offers instant change in the attitude of the watercraft
while underway allowing for tighter turns or quicker
acceleration on plane, as the rider prefers. Q.S.T.S.
offers 24 degrees of total trim range.
- Stainless Steel Impeller
Housing Liner: For high durability, the liner
maintains accurate clearance tolerances between
the impeller and the housing.
- High Flow Intake Duct and
Grate : The dynamic shape of these items directs
water flow into the pump for better thrust, performance
and hook up.
- Cooling Water Intake Filter:
Filters out harmful debris that could cause blockage
of important cooling water passages.
- Thrust Directional Enhancer
(T.D.E.): Helps direct water flow at low and
high speed operation for exceptional maneuverability
as well as assisting the trim system in efficiency.
- Pumps are Manufactured with
YDC30 : A combination of zinc and copper alloys,
developed by Yamaha marine engineers, that offers
excellent corrosion protection.
|
- The FX's Sheet Molded Compound
(SMC) hull and deck is designed specifically
for unmatched luxury, comfort and performance for
up to three people. The FX hull is reinforced with
a foam-filled SMC liner, which increases durability
and reduces vibration. The FX deck design gives
an exciting profile sure to turn heads on and off
the water.
- Progressive, Stepper Draft
V-Hull with Integrated Bow Spray Guard: Provides
excellent maneuverability, handling and comfort.
- Performance Sponson Design:
Provides added straight-line comfort and an improved
two-up and three-up riding experience.
|
- Five-step Adjustable Tilt
Steering System: Allows the rider to adjust
the steering column angle from 55 degrees to 35
degrees.
- Multi-function Electronic
Information Center: Provides the operator a
quick read on speed, RPM, fuel level, low fuel
warning, low oil pressure warning, battery voltage,
overheat warning, hour meter, check engine light
with self-diagnostic function and the industry's
only audible warning system.
- 26 Gallons of Total Storage:
Includes a large 19.8-gallon cooler, rear storage
tub and glove box.
- Pneumatically-assisted
Storage Compartment: Large 19.8-gallon front
compartment, remote release lever and pneumatic
lid support.
- Glove Box with Self-draining
Beverage Holders: The industry's first self-draining
beverage holders.
- Extra Large Boarding Platform:
Provides a stable platform for reboarding.
- Dual Mirrors: Automotive
style and convenience.
- Finger Throttle Lever:
Provides added comfort while reducing hand fatigue.
- Yamaha's Trademarked
Visibility Spout®: A waterspout from
the rear of the craft that improves the craft’s
conspicuity.
|
|
|
|
 |
|
| Engine Type |
4-Cylinder, 4-Stroke |
|
| Bore/Stroke |
74mm x 58mm |
|
| Displacement |
998cc |
|
| Fuel |
Regular Unleaded |
|
| Type of Exhaust |
Wet |
|
| Type of Lubrication |
Dry Sump |
|
| Cooling |
Open-Looped, Water |
|
| Starting |
Electric |
|
| Ignition |
Direct |
|
| Compression Ratio |
11.4:1 |
|
| Carburetor/Injection |
EFI (Electronic Fuel Injection) |
|
| Ignition Timing |
31° BTDC |
|
| Spark Plug |
NGK CR9EB |
|
| Pump |
155mm Axial Flow |
|
| Transmission |
Direct Drive from Engine |
|
| Gear Ratio |
1.47:1 |
|
| Impeller |
3-Blade, Stainless Steel (17 pitch) |
|
| Length |
132.7” (3.34m) |
|
| Width |
48.4” (1.23m) |
|
| Height |
45.7” (1.16m) |
|
| Seat Length |
66”/56” (1.67m/1.43m) |
|
| Dry Weight |
848 lb (384 kg) |
|
| Fuel Capacity |
18.5 gal (70L) |
|
| Vehicle Capacity |
3 person/ 529 lb (240 kg) |
|
| Oil Capacity |
1.32 gal (5L) |
|
| Storage Capacity |
26.4 gal (100L) |
|
| Hull Material |
SMC (Sheet Molded Compound) |
|
| Warranty |
1 Year (Limited Factory Warranty) |
|
| Color |
Heat Red |
|
|
|
|
