 |
FX Cruiser |
|
|
- The FX Cruiser® is
powered by the Yamaha MR-1™ engine, the
first four-stroke motor designed specifically for
personal watercraft applications. The MR-1 powerplant
is a compact, ultra-lightweight, four-cylinder,
998cc, DOHC, 20-valve, liquid-cooled engine for
unequalled performance.
- Electronic Fuel Injection
(EFI): Four individually adjustable throttle
bodies, throttle position sensor (TPS) and intake
air pressure and air temperature sensors supply
the optimum air/fuel mixture. The results are a
smooth, high power output with low fuel consumption
and low exhaust emissions.
- Specially Designed, One-piece
Cylinder and Crankcase Assembly: Provides tremendous
engine rigidity that's lighter and stiffer than
two-piece designs.
- Slant Detection Switch:
Electronic switch stops engine and oil pumps immediately
if watercraft becomes overturned, protecting motor
from unwanted water ingestion.
- High Volume Intake Box:
With water repellent air filter and flame arrestors.
- Dry Sump Lubrication:
Uses two engine oil pumps to deliver lubricated oil
to each moving part with water-jacketed sump and
oil backflow protection.
- Yamaha Engine Management
System (Y.E.M.S.): An integrated, computerized
management system that controls and adjusts such
functions as ignition timing, fuel injection mapping,
engine diagnostics and OTS. The OTS function of
YEMS activates when the operator releases the throttle
lever and attempts to steer the watercraft. This
assists the operator in turning while the watercraft
is decelerating.
- Independent Water-jacketed
Exhaust Manifolds with Collector: Achieves
high power while keeping noise and exhaust heat
under control.
- Thermostatic and Pressure
Controlled Cooling System: Water flow through
the engine is controlled by a thermostat and pressure
system and is maintained by a pressure control
valve.
- Electronically Controlled,
Variable Ignition Timing: For exact ignition
advance control at all throttle positions and RPMs.
- Corrosion Protection System:
Sacrificial zinc anodes protect the engine from harmful
galvanic corrosion. Stainless steel fasteners (nuts,
bolts, hardware) provide a long service life. Cylinders,
cases and heads are all treated with a durable oxide
coating to form a barrier between corrosion and expensive
engine parts.
|
- The FX Cruiser's 155mm
hyper-flow jet pump propulsion system with
three-blade stainless steel impeller is designed
to maximize water flow for high performance. The
FX pump configuration provides excellent hook-up
and smooth acceleration.
- Reverse: Allows the
watercraft to be backed up off a trailer or out of
tight spots where you can not turn around easily.
- Quick Shift Trim System
(Q.S.T.S.): Mechanically operated, this system
offers instant change in the attitude of the watercraft
while underway allowing for tighter turns or quicker
acceleration on plane, as the rider prefers. Q.S.T.S.
offers 24 degrees of total trim range.
- Stainless Steel Impeller
Housing Liner: For high durability, the liner
maintains accurate clearance tolerances between
the impeller and the housing.
- High Flow Intake Duct and
Grate: The dynamic shape of these items directs
water flow into the pump for better thrust, performance
and hook up.
|
- The FX Cruiser's Sheet
Molded Compound (SMC) hull and deck: Designed
specifically for unmatched luxury, comfort and
performance for up to three people. The FX Cruiser
hull is reinforced with a foam-filled SMC liner,
which increases durability and reduces vibration.
The FX Cruiser deck design gives an exciting profile
sure to turn heads on and off the water.
- Integrated Bow Spray Guard:
Reduces bow spray.
- Progressive, Stepper Draft
V-Hull with Integrated Bow Spray Guard: Provides
excellent maneuverability, handling and comfort.
- Performance Sponson Design:
Provides added straight-line comfort and an improved
two-up and three-up riding experience.
|
- Yamaha Cruiser Seat:
Yamaha’s innovative Cruiser seat provides
excellent comfort for the passenger and driver.
- Five-step Adjustable Tilt
Steering System: Allows the rider to adjust
the steering column angle from 55 degrees to 35
degrees.
- Multi-function Electronic
Information Center: Provides the operator a
quick read on speed, RPM, fuel level, low fuel
warning, low oil pressure warning, battery voltage,
overheat warning, hour meter, check engine light
with self-diagnostic function and the industry's
only audible warning system.
- 26 Gallons of Total Storage:
Includes a large 19.8-gallon cooler, rear storage
tub and glove box.
- Pneumatically-assisted
Storage Compartment: Large 19.8-gallon front
compartment, remote release lever and pneumatic
lid support.
- Glove Box with Self-draining
Beverage Holders: The industry's first self-draining
beverage holders.
- Extra Large Boarding Platform:
Provides a stable platform for reboarding.
- Dual Mirrors: Automotive
style and convenience.
- Finger Throttle Lever:
Provides added comfort while reducing hand fatigue.
- Yamaha's Trademarked
Visibility Spout®: A water spout from the rear of
the craft that improves the craft's conspicuity.
|
|
|
 |
|
| Engine Type |
4-Cylinder, 4-Stroke |
|
| Bore/Stroke |
74mm x 58mm |
|
| Displacement |
998cc |
|
| Fuel |
Regular Unleaded |
|
| Type of Intake |
Spec Not Available |
|
| Type of Scavenging |
Spec Not Available |
|
| Type of Exhaust |
Wet |
|
| Type of Lubrication |
Dry Sump |
|
| Cooling |
Water |
|
| Starting |
Electric |
|
| Ignition |
Direct |
|
| Compression Ratio |
11.4:1 |
|
| Carburetor/Injection |
EFI (Electronic Fuel Injection) |
|
| Spark Advance |
Spec Not Available |
|
| Ignition Timing |
31° BTDC |
|
| Spark Plug |
NGK CR9EB |
|
| Pump |
155mm High-Pressure Axial Flow |
|
| Transmission |
Direct Drive from Engine |
|
| Impeller |
3-Blade, Stainless Steel (17 pitch) |
|
| Length |
132.7” (3.37m) |
|
| Width |
48.4” (1.23m) |
|
| Height |
48.8” (1.24m) |
|
| Seat Length |
66”/56” (1.67m/1.43m) |
|
| Dry Weight |
864 lbs (392 kg) |
|
| Fuel Capacity |
18.5 gal (70 L) |
|
| Reserve Fuel Capacity |
Not Applicable |
|
| Oil Capacity |
1.1 gal (4.3 L) |
|
| Vehicle Capacity |
3 person/ 529lbs (240 kg) |
|
| Storage Capacity |
26.4 gal (100 L) |
|
| Hull Material |
SMC (Sheet Molded Compound) |
|
| Warranty |
1 year limited warranty |
|
| Color |
Platinum |
|
|
|
|
