|
 |
FX Cruiser SHO |
|
|
- The FX Cruiser SHO
is powered by an all new 1.8 liter, supercharged,
super high output Yamaha Marine Engine.
This 1812cc engine, which is purpose built
for the marine environment, is the largest
displacement engine ever installed in a personal
watercraft. It is also the only engine in
the high-performance, four-stroke category
optimized to run on the least expensive Regular
Unleaded fuel.
- Electronic Fuel Injection
(EFI): Four electronically controlled
fuel injectors, throttle position sensor
(TPS) and intake air pressure and air temperature
sensors supply the optimum air/fuel mixture.
The results are a smooth, high power output
with low fuel consumption and low exhaust
emissions.
- Specially Designed,
One-piece Cylinder and Crankcase Assembly:
Provides tremendous engine rigidity that's
lighter and stiffer than two-piece designs.
- Slant Detection Switch:
Electronic switch stops engine and oil pumps
immediately if watercraft becomes overturned,
protecting motor from unwanted water ingestion.
- High Volume Intake
Box: With water repellent air filter
and flame arrestors.
- Wet Sump Lubrication:
Uses two engine oil pumps to deliver lubricated
oil to each moving part with water-jacketed
sump and oil backflow protection.
- Yamaha Engine Management
System (Y.E.M.S.): An integrated, computerized
management system that controls and adjusts
such functions as ignition timing, fuel injection
mapping, engine diagnostics and off throttle
steering. The OTS function of Y.E.M.S. activates
when the operator releases the throttle lever
and attempts to steer the watercraft. This
assists the operator in turning while the
watercraft is decelerating.
- Independent Water-jacketed
Exhaust Manifolds with Collector: Achieves
high power while keeping noise and exhaust
heat under control.
- Thermostatic Cooling
System: Water flow through the engine
is automatically controlled through a thermostat
sensor.
- Corrosion Protection
System: Sacrificial zinc anodes protect
the engine from harmful galvanic corrosion.
Stainless steel fasteners (nuts, bolts, hardware)
provide a long service life. Cylinders, cases
and heads are all treated with a durable
oxide coating to form a barrier between corrosion
and expensive engine parts.
- Electronically Controlled,
Variable Ignition Timing: For exact ignition
advance control at all throttle positions
and RPMs.
- Direct Ignition:
For more efficient combustion.
|
- The FX Cruiser SHO’s
155mm hyper-flow jet pump propulsion system: The
three-blade stainless steel impeller is designed
to maximize water flow for high performance.
The FX pump configuration provides excellent
hook-up and smooth acceleration.
- The industry’s
only Reverse with Traction Control technology:
maintains the perfect RPM to provide the
optimal speed for effectively maneuvering
when the watercraft in reverse
- Quick Shift Trim System
(Q.S.T.S.): Mechanically operated, this
system offers instant change in the attitude
of the watercraft while underway allowing
for tighter turns or quicker acceleration
on plane, as the rider prefers. Q.S.T.S.
offers 24 degrees of total trim range.
- Stainless Steel Impeller
Housing Liner: For high durability, the
liner maintains accurate clearance tolerances
between the impeller and the housing.
- High Flow Intake Duct
and Grate: The dynamic shape of these
items directs water flow into the pump for
better thrust, performance and hook up.
- Pumps are Manufactured
with YDC30: A combination of zinc and
copper alloys, developed by Yamaha marine
engineers, that offers excellent corrosion
protection.
|
- The FX SHO features
the world’s first hulls and decks manufactured
through the use of cutting edge nanotechnology.
Yamaha’s new NanoXcel ultra-lightweight,
high strength material reduces the weight
of the hull, deck and liner by 25% and provides
performance gains in acceleration, top speed
and handling. Additionally, the NanoXcel
material offers a shinier, gem-like finish
which reduces surface tension on the water,
providing a more nimble, responsive ride.
- Progressive, Stepper
Draft V-Hull with Integrated Bow Spray Guard:
Provides excellent maneuverability, handling
and comfort.
- Sponson Design:
Provides added straight-line comfort and an
improved two-up and three-up riding experience.
|
- Yamaha’s exclusive
Cruise Assist: The industry’s first
system that allows the driver to set and
hold a particular speed while maintaining
a comfortable riding position with the throttle.
Once the speed is set, the driver can increase
or decrease the speed through the simple
push of a button. When the throttle is disengaged
the system shuts off.:
- Yamaha’s exclusive
No Wake Mode: makes cruising through
no-wake zones a breeze. Once engaged, the
no-wake mode moves the engine’s RPMs
to an optimal speed, approximately 5 mph,
for efficiently navigating through a no-wake
zone. Once through, the driver simply applies
throttle and the no-wake mode is released.
- Yamaha Cruiser Seat:
Yamaha’s innovative Cruiser seat provides
excellent comfort for the passenger and driver.
- Four-step Adjustable
Tilt Steering System: Allows the rider
to adjust the steering column angle from
55 degrees to 35 degrees.
- Multi-function Electronic
Information Center: Provides the operator
a quick read on speed, RPM, fuel level, low
fuel warning, low oil pressure warning, battery
voltage, overheat warning, hour meter, check
engine light with self-diagnostic function
and the industry's only audible warning system.
- Industry's First Remote
Controlled Transmitter: With the touch
of a button on Yamaha’s innovative
remote controlled transmitter, you can activate
and deactivate the FX Cruiser SHO’s
digital security system and all-new Low RPM
Mode from up to 30 feet away.
- Foot Chocks:
The foot chocks, along with the Cruiser seat
and handlebars, create a three-point contact
system that reduces tension on the driver’s
arms and legs.
- Low RPM Mode™:
Also with the touch a button on the remote
transmitter, the top speed of the FX Cruiser
SHO is reduced by nearly 30 percent.
- Yamaha Security System:
This security system that can be activated
with the touch of a button ensures that no
one starts the FX Cruiser SHO without your
permission.
- 26 Gallons of Total
Storage: Includes a large 19.8-gallon
cooler, rear storage tub and glove box.
- Glove Box with Self-draining
Beverage Holders: The industry's first
self-draining beverage holders.
- Extra Large Boarding
Platform with Retractable Reboarding Step:
Provides a stable area for reboarding.
- Dual Mirrors:
Automotive style and convenience.
- Finger Throttle Lever:
Provides added comfort while reducing hand
fatigue.
- Yamaha's Trademarked
Visibility Spout®: A waterspout from
the rear of the craft that improves the watercraft’s
conspicuity.
|
|
|
|
|
 |
|
| Engine Type |
4-Cylinder, 4-Stroke |
|
| Bore/Stroke |
86 x 78mm |
|
| Displacement |
1812cc |
|
| Fuel |
Regular Unleaded |
|
| Type of Exhaust |
Wet |
|
| Type of Lubrication |
Wet Sump |
|
| Cooling |
Open-Looped, Water |
|
| Starting |
Electric |
|
| Ignition |
Direct |
|
| Compression Ratio |
8.6:1 |
|
| Carburetor/Injection |
Electronic Fuel Injection |
|
| Ignition Timing |
20° BTDC |
|
| Spark Plug |
NGKLFR6A |
|
| Pump |
155mm Axial Flow |
|
| Transmission |
Direct Drive from Engine |
|
| Impeller |
3-Blade, Stainless Steel |
|
| Length |
132.7” (3.37m) |
|
| Width |
48.4” (1.23m) |
|
| Height |
48.8” (1.24m) |
|
| Seat Length |
N/A |
|
| Dry Weight |
841 lb (381 kg) |
|
| Fuel Capacity |
18.5 gal (70 L) |
|
| Oil Capacity |
1.1 gal (4.2 L) |
|
| Vehicle Capacity |
3 person/ 529 lb (240
kg) |
|
| Storage Capacity |
26.4 gal (100 L) |
|
| Hull Material |
NanoXcel |
|
| Warranty |
1 year limited warranty |
|
| Color |
Crimson Red Metallic;
Platinum Metallic |
|
|
|
|
|
